Škoda Winnetou: The Prototype That Stole the Show but Never Hit the Road

Remained in the Dream - In the world of Czech automotive history, Škoda's convertibles, the Škoda 450 and later the Felicia, were celebrated for their beauty and allure. They not only made waves in the domestic Czech market but also drew attention abroad. However, with the production of the Felicia coming to an end in 1964, it marked the conclusion of an era for open-top Mladá Boleslav brand cars. Though there were plans to resurrect the convertible spirit, the Škoda Winnetou, it remained a dream unfulfilled.

The Škoda Winnetou roadster prototype was conceived in the 1960s by Škoda's Swiss importers, A.P. Glättli AG, based near Zurich in Dietlikon. (Picture from: Auto.cz)

Surprisingly, the birth of this exotic car in Mladá Boleslav during the socialist era was not a product of Škoda's own designers. Instead, it was conceived in the 1960s by its Swiss importers, A.P. Glättli AG, based near Zurich in Dietlikon. Their vision was to craft a stylish roadster based on an existing Škoda model and offer it to customers in Western Europe at an attractive price point.

The Škoda Winnetou's vision was to craft a stylish roadster based on an existing Škoda model and offer it to customers in Western Europe at an attractive price point. (Picture from: AutoRevue.cz)

In 1967, the prototype of a sporty convertible, bearing the curious name Škoda Winnetou, named after the "Apache Chief" from Karl May's books. This roadster made its global debut in March 1967 at the Geneva Motor Show, where it immediately captured the spotlight. Even today, its distinctive design continues to captivate enthusiasts. This two-seater roadster came together rather swiftly and, as per available information, underwent assembly in Aachen, Germany by Hubert Souren KG, where the laminate body designed by American Bill Devin was also produced.

The Škoda Winnetou roadster prototype (no.3 from the left) made its global debut in March 1967 at the Geneva Motor Show, where it immediately captured the spotlight. (Picture from: AutoRevue.cz)

The Škoda Winnetou featured a space frame crafted from steel profiles, equipped with axles borrowed from the popular Škoda 1000 MBX and coupled with components from Volkswagen. Nestled at the rear, the engine powered the rear wheels. Measuring a mere 3,815 millimeters in length, 1,595 millimeters in width, and, with the emergency canvas roof included, 1,300 millimeters in height, it epitomized compactness.

The Škoda Winnetou featured a space frame crafted from steel profiles, equipped with axles borrowed from the popular Škoda 1000 MBX and coupled with components from Volkswagen. (Picture from: AutoRevue.cz)

Stepping inside, the cabin offered accommodations for just two passengers, embodying simplicity and functionality. Under the sloping front hood, only a toolkit and a battery found their place, while the lone "luggage" compartment was inconveniently positioned at the rear, right alongside the engine in the engine compartment.

The Škoda Winnetou measuring a mere 3,815 millimeters in length, 1,595 millimeters in width, and, with the emergency canvas roof included, 1,300 millimeters in height, it epitomized compactness. (Picture from: AutoRevue.cz)

The powertrain concealed beneath the Winnetou's hood did not pack a punch. The 1.0-liter four-cylinder engine, borrowed also from the Škoda 1000 MBX, churned out a modest output of around fifty horsepower. This performance was far from impressive, especially for a car weighing just under 600 kilograms. 

In front of the driver was a three-spoke steering wheel with a wooden wreath, a speedometer calibrated to an even more optimistic 180 km/h, a coolant temperature gauge and a fuel gauge located on the left. (Picture from: AutoRevue.cz)

When the Winnetou underwent performance testing in Mladá Boleslav to determine its fate, it fell far short of expectations. Rather than achieving the claimed top speed of 160 km/h, the car reached a mere 126 km/h during testing. Accelerating from 0 to 100 km/h was a painstakingly slow process, taking 30.2 seconds. The amalgamation of these performance setbacks, coupled with the inherent impracticality of the design and a relatively high price by Škoda's standards, sealed the fate of the Winnetou. 

The Škoda Winnetou roadster prototype powered by a rear-mounted 1.0-liter four-cylinder engine, taken from the Škoda 1000 MBX, churned out a modest output of around 50 hp. (Picture from: AutoRevue.cz)

The Winnetou's primary allure was its price, which was anticipated to remain under 7,900 Swiss francs. This undercut the competition's pricing across Europe at the time. However, even with this compelling pricing strategy, the Winnetou failed to secure a green light for production. It remained a prototype and never transitioned into production. The sole existing prototype is rumored to have ended up in the possession of a private collector. Apologies, the following video pertains to the Felicia roadster, Škoda Winnetou's predecessor, not the Winnetou itself.

In hindsight, the Škoda Winnetou remains a captivating footnote in automotive history, symbolizing a unique chapter in the brand's journey. While it may never have dominated the roads, it continues to kindle the imaginations of automotive enthusiasts worldwide, commemorating 56 years since its debut back in the 1967. *** [EKA | FROM VARIOUS SOURCES | AUTO.CZ | DENIK.CZ | AUTOREVUE.CZ | ALLCARINDEX | WIKIPEDIA ]

Note: This blog can be accessed via your smart phone.