Here's the unusual Bugatti's badge spyder-styled sportscar of 1990s

Weird ONES Many strange cars milling around without knowing by us. So, once we meet these kinds of vehicles, we are surprised. Then asked yourself, why is there a car like that? So why is its shape like that, doesn't match with the badge? The same thing happened when we found the figure of a vehicle like that.

1994 EBM Tazio Spyder is designed by Pininfarina to be built by Eric Booth Motors (EBM) then proposed to the Molsheim-based automaker for possible production. (Picture from: UltimateCarPage)

While surfing the internet we came across some pictures on Ultimatecarpage showing a roadster with Bugatti badges on all sides, and the Bugatti name in big letters at rear is attended on an automotive event in England back in 2005. Upon closer look at, it was not had and carried typical styles which is usually existed on the Bugatti car today. Then what car is it? Frankly, we are curious, maybe you are too.

As You can see the EBM Tazio Spyder has Bugatti badges on front, and all sides. (Picture from: UltimateCarPage)

To be able to end those curiosity of us, then we look for information related to the mentioned car in cyberspace. Finally we found related information from the BugattiPage sites, it turned out that the car was not produce from the world's renowned car manufacturer based in Molsheim, France, but made by an automotive company from South Africa named Eric Booth Motors (EBM) back in 1994.

The EBM Tazio Spyder also has the Bugatti name in big letters at rear. (Picture from: UltimateCarPage)

It is known that the South African automotive company was recorded to have made about six or seven concept cars, presumingly with funds from a few British car enthusiasts, in order to offer them to the major European car manufacturers.

The vehicle needs to be viewed to fully appreciate its fine engineering excellence as You can see at the EBM Spyder's cabin. (Picture from: UltimateCarPage)

Initially the project done by the Cape Town based company reportedly also involved Pininfarina, an Italian well-known automotive design house to make the design and the resulting car was named EBM Tazio were made in the mid-90s as many as three units, consisting two speedsters and one coupe, before the project was ceased.

The EBM Tazio Spyder powered by a 5.7L V8 mid-mounted engine of Chevrolet with 400-420 BHP coupled with Audi 5-speed transaxle gearbox. (Picture from: UltimateCarPage)

The vehicle needs to be viewed to fully appreciate its fine engineering excellence. Initially it used a 4.0L V8 BMW's engine, apparently that motor didn't match the expectations of the engineers, which is why they switched to a 5.7L V8 mid-mounted engine of Chevrolet with 400-420 BHP. The engine coupled with Audi 5-speed transaxle gearbox.

Besides the Tazio Spyder model, the South African Auto maker also built The EBM Tazio Coupe. (Picture from: BugattiPage)

And for its legs supporting by an advanced suspension system also taken from Audi, while its brake system used the BMW's parts.  Its performance said to be made an acceleration from zero to 100 kph under 5 second and achieved top speed beyond 301.5 kph.

The EBM Tazio Coupe as well as the spyder said to be made an acceleration from zero to 100 kph under 5 second and achieved top speed beyond 301.5 kph. (Picture from: GTPLanet.net)

While in terms of shape, it seen those EBM-made cars, which is said to have been designed by Pininfarina, looks more like a Ferrari-made by than Bugatti. Then why then one of those cars that carries the speedster style using Bugatti badge? 😎

The EBM Tazio Coupe has a unique roof scoop functioned as the air channeling for engine cooling. (Picture from: BugattiPage)

As quoted of Ultimatecarpage, the only one unit built in Bugatti badged trim proposed to the Molsheim-based automaker for possible production. Unfortunately, it didn't work and it still to be one-off prototype as You can see today along with its Tazio Coupe sibling.

The EBM Tazio Coupe (left) posed along with the Spyder (right) while being built by the company. (Picture from: AllCarIndex)

Well, among two of the spyders mentioned above that were being worked on at that time, there was 1 unit that was not completed yet when the project ceased. As quoted of Catawiki, the unfinished unit some time ago, precisely in 2018 was offered for sale.

Regarding the sale of the unfinished car unit above, currently it is unknown whether it was sold or not. It's indeed very difficult to obtain information related to the EBM automaker, because actually the company has out of business since the 2000s. 😢 *** [EKA | FROM VARIOUS SOURCES | BUGATTIPAGE | CATAWIKI | VROOM VROOM | ULTIMATECARPAGE | GTPLANET.NET | LOT-ART | FACEBOOK EB-MANX | FLICKRIVER | ALLCARINDEX ]

Note: This blog can be accessed via your smart phone.