The Verificacao by Queen Lekha Chopper

Of the many contestants of the Kustomfest 2016 which was held in October 8-9, 2016, 'The Verificacao' of Queen Lekha Chopper (QLC) became one of the most attracted the event's visitors.

The design of Yamaha XS650 engined motorcycle was simple and carried a typical traditional classic chopper with amazing details. So naturally if the highest award in Japan Chopper and Bobber class successfully achieved. And according to QLC owner Agung Satria, it took time about six months to build this bike and really prepared to perform at the Kustomfest 2016.

The Verificacao by Queen Lekha Chopper at the Kustomfest 2016. (Picture from: http://adf.ly/1f6MkP)

"Initially, motorcycle owners want to build of a British motorcycle, due to the components are mainly machinery is not available and hard to find, finally we turn to Japanese motorcycles. We built by using the 1977 Yamaha XS650 engine," said Yaya, as he usually addressed.

After that the work on the motorcycle is started and as if a race against time given the timing of the Yogyakarta's motorcycle festival event approaching (6 months). Fortunately, the machine acquired was in a healthy condition. So that they stay focused on the frame making of 4 mm seamless pipe.

Front three quarter of the Verificacao by Queen Lekha Chopper at the Kustomfest 2016. (Picture from: http://adf.ly/1f6MkP)

According to the concept, the stern designed hardtail or rigid, while its springer front fork made with a slope angle of 28º. And the fork itself use solid iron material which is then layered with chrome by the builder who had opened the garage from 2011 ago.

Here are several detailed pictures of the Verificacao. (All pictures taken from: http://adf.ly/1f6MkP)

What is unique is the design of the tank as well as the rear fender, looked layered with a grating that is on the inside. Details, this grid whitewashed with dark color, contrast with the matte black tank that sprinkled by glitter.

Rear three quarter of the Verificacao by Queen Lekha Chopper at the Kustomfest 2016. (Picture from: http://adf.ly/1f6MkP)

"To make it look nicer, the seat designed like a thin triangle, small at the front and wide at the bottom," explained the owner of the garage located in the Green House residential complex, Karangkajen Mergasan, Yogjakarta.

The details of Cahaya Prayoga motorcycle used a clear handlebars without any handle. Mechanism of throttle shells were also made detail, recycle of manual hand drill. Uniquely the tip of exhaust instead taken from the pipe connections. After all chrome plated, so it looks fancy is not it?

Kept spur your adrenaline on the power of two-wheeled monster and stay alive with the true safety riding. May God will forgive Your sins and so does the cops.... ••• [EKA | FROM VARIOUS SOURCES | OTOMOTIFNET]

Note: This blog  can be accessed via your smart phone