RK Thing, an unusual three-wheeled bike

A unique modified three-wheeled motorcycle made the motorcycle enthusiasts stunned and fascinated. It is one of the best works of RK Concept, a motorcycle modification workshop in Texas named 'RK Thing'. This home modifications is well known around the country because of the out-of-the-box ideas.

Rafik Kaissi posed with his unique three-wheeled bike named 'RK Thing'. (Picture from: http://bit.ly/1nEVya8)

This motorcycle is a three-wheeled motorcycle used an Aprilia 1,000 cc engine that resemble aliens. What's interesting about this modification changes? Its suspensions system was not used shock absorbers system like in general motorcycles, but the steel wire of five pieces on the front. As well as the rear. According to Rafik Kaissi, the modifier that the three-wheeled bike is rideable.

Front three quarter of RK Thing. (Picture from: http://bit.ly/1nEVya8)

Right side view of RK Thing. (Picture from: http://bit.ly/1S9E3dk)

Another uniqueness, Bike's single saddle in the form of two curved pipe stem. Then, the design of the front fork. The axle is simply connected to the longitudinal pipe that has a length no longer than 50 cm, then connected with an iron rod from above.

Rear side view of RK Thing. (Picture from: http://bit.ly/1nEVya8)

Take a look more closely, where is the fuel tank? The modifier positioning it on the front, precisely on the handlebars also functions as windshield. No wonder, if this three-wheeled bike so-called out-of-the-box.
So where lies another unusual thing of this modification work? See the diameter and width of the front wheel is not the same as that behind. Interestingly, the addition of a fourth wheel as a counterweight to the motorcycle, when acceleration and the front wheel raised high. *** [EKA | FROM VARIOUS SOURCES | RK CONCEPT | AUTOEVOLUTION]
Note: This blog can be accessed via your smart phone.